The Leader in Factory Cooling & Industrial Ventilation
New Product

AirVision System

Energy Recovery Ventilator (ERV)

Provides fresh, outdoor air while exhausting stale indoor air and, crucially, recovers both heat and moisture to pre-condition the incoming air.

Issues With Traditional Indoor Air-Conditioning Solution

Stale Air: The system recirculates existing indoor air, which can become stale, dry, and accumulate contaminants like dust, bacteria, and volatile organic compounds (VOCs).
Overworking: Without ventilation, the air conditioner must work harder to both cool and filter the air, leading to increased energy consumption and higher utility bills.
Humidity Imbalance: The system may not adequately control humidity, potentially leading to environments that are too dry, which can cause discomfort.

Benefits of AirVision 

AirVision ERV significantly improves indoor air quality by removing indoor pollutants like carbon dioxide (CO2), volatile organic compounds (VOCs), odors, and allergens while filtering incoming fresh air to capture dust and other outdoor contaminants.

Without AirVision ERV

Loss of Concentration and Fatigue
Headache, Fatigue
High chance of Covid 19 transmission
in the absence of fresh air.

With AirVision ERV

CO2 Reduced
Formaldehyde & VOC Displaced
Chances of Covid 19 transmission
is reduced

Bringing in Outdoor to Indoor.

Fresh air change system draws in clean, fresh air from
outside into the office workspace and sends stale air out. AirVision air change system features a patented heat exchanger which facilitates the transference of heat and moisture between the air streams. That way, the air that comes in picks up the coldness of the air that is sent out but not the contamination. Also, the air change unit captures the outside contaminants and pollutants ensuring that that enters the office space is clean. Along with this transfer of air streams, the system expels an equal amount of air from the office space.

How AirVision System is Installed?

ERV is mounted in a suitable location, then running separate, insulated ductwork for fresh air intake and stale air exhaust. Next, the ductwork is connected to the unit and the appropriate outlets/inlets inside the house and through the exterior wall.

Fresh Air Suppy Hood:
Exhaust Air Hood:
Galvanized Spiral Duct:
Fresh Air Diffuser:
Stale Air Diffuser:

AirVision Key Components

Primary Filters
Primary filter is 95% efficient in capturing particles of 10 micron and larger eg: dusts
Differential Pressure Switch
Filter pressure switch sense the differential pressure build-up and send a signal.
Heat Exchanger
Crossflow design with an efficiency of
more than 73%.
Brushless DC Motor
Brushless DC motor with 10 speed controls
Primary Filters Medium Filter
Medium filter is of grade F9 96% efficient in capturing particles of 1-3 micron under pm2.5 atmospheric pollutants.
Touch Screen Intelligent Controller
The controller comes standard with the fresh air change
unit and controls the overall operation of the unit and
their features include
CO2 Sensor
The addition of a CO2 sensor to the fresh air change system allows the monitoring of CO2 levels in the workspace. Data are sent directly to the Touch Screen Intelligent Controller
Model
Rated Air Flow
(m³/h)
Rated E.S.P
(Pa)
Enthalpy Efficiency (%)
Cooling
Temperature
Efficiency (%)
Noise
dB(A)
Power
Input (W)
Weight
(kg)
XHBQ-D5DMTHA
500
110
63 ~ 72
67 ~ 75
39
140
38
XHBQ-D10DMTHA
1000
140
60 ~ 68
62 ~ 72
43
312
81
XHBQ-D15DMTHA
1500
95
63 ~ 71
65 ~ 73
50
700
147
XHBQ-D20DMTHA
2000
115
60 ~ 68
62 ~ 72
51.5
724
167

You may also like these products

Create immense air movement like never before - the only way to cool large spaces.
See More
Point & Shoot flexibility - determine how air flows through your space.
See More
Exhaust hot & contaminated air out from your factory roof with this motorized exhaust fan.
See More

Get in Touch

Bangkok
095-550-0838
Call Now
sundownloadmenucross-circle